10.09.2018 — Berlin Urban Tech Summit

BERLINDUSTRIES leads the way: true to this mot­to, this year’s “Ber­lin Urban Tech Sum­mit” focu­ses on Berlin’s indus­try on the thres­hold of the digi­tal era.

Get the latest infor­ma­ti­on on topics such as digi­tal trans­for­ma­ti­on pro­ces­ses and robo­tiza­ti­on, but also on chan­ging job mar­kets and other socio-poli­ti­cal issu­es.

Urban tech indus­try experts meet CEOs, poli­ti­ci­ans and rep­re­sen­ta­ti­ves of asso­cia­ti­ons, cham­bers and tra­de uni­ons. Look for­ward to top-notch speakers, inno­va­ti­ve pre­sen­ta­ti­ons and inte­res­ting dis­cus­sions.

More infor­ma­ti­on about the pro­gram and the speakers:


Mobi­li­ty goes Addi­ti­ve will have a booth at this event. If you are inte­rested in sup­porting us, plea­se do not hesi­ta­te to con­tact us.

09.10.2018 — Construction Equipment Forum, Hannover

The pro­gres­si­ve auto­ma­ti­on and digi­tiza­ti­on as well as the increa­sing rele­van­ce of alter­na­ti­ve dri­ves
is chan­ging the gene­ral con­di­ti­ons in the con­struc­tion machine­ry indus­try and crea­ting new poten­ti­al. New con­cepts are crea­ted
and solu­ti­ons for the vehi­cles and con­struc­tion sites of tomor­row, with the aim of increa­sing effi­ci­en­cy, avo­i­ding emis­si­ons
and cost savings through inno­va­ti­ve tech­no­lo­gies.
Against this back­ground, toge­ther with the foun­ding part­ners Ammann Group, Wacker Neu­son SE and
Robert Bosch GmbH the CONSTRUCTION EQUIPMENT FORUM will take place on Octo­ber 9 and 10, 2018. The Con­fe­rence
has the goal of ensu­ring that con­struc­tion machine­ry buy­ers, manu­fac­tu­rers and sup­pliers at all ani­mal levels at manage­ment level are neu­tral and
to dis­cuss the stra­te­gic ori­en­ta­ti­on of the con­struc­tion machine­ry indus­try and new tech­no­lo­gies inde­pendent­ly of pro­jects

At this event, Mrs. Brick­we­de will par­ti­ci­pa­te in a work­shop as an expert on 3D prin­ting of spa­re parts. Mobi­li­ty goes Addi­ti­ve will have a booth at the accom­pany­ing exhi­bi­ti­on.

More about the event can be found here:



Con­struc­tion machi­nes of the future: an inno­va­ti­on agen­da 2025

09.10.2018 — 10.10.2018

Mari­tim Air­port Hotel, Hano­ver

Foun­da­ti­on Part­ners
Wacker Neu­son Group, Ammann Group, Robert Bosch GmbH

26.09.2018 — Annual Meeting of Mobility goes Additive

The third edi­ti­on of our Annu­al Mee­ting will be some­thing very spe­cial. We would like to take the oppor­tu­ni­ty to inau­gu­ra­te the new pre­mi­ses of the Mobi­li­ty goes Addi­ti­ve e.V. office toge­ther with you.
We invi­te you to visit the cam­pus of Berlin’s Mari­en­park on Sep­tem­ber 26, 2018!

  • key­notes from Sau­ber Motor­sports, Deut­sches Herz­zen­trum Ber­lin, Deut­sche Bahn, …
  • reports from the working groups
  • pre­sen­ta­ti­ons of selec­ted pro­jects
  • inter­ac­tive for­mats
  • renow­ned experts as guests
  • pos­si­bi­li­ty to rep­re­sent your com­pa­ny with a booth

And, of cour­se, the net­wor­king should not be too short; we have plan­ned generous breaks and an evening event with din­ner.

More about our event and ticke­ting:

Annu­al Mee­ting 2018 en

18.09. — 23.09.2018 — InnoTrans Berlin, Germany

Bet­ween 18 and 21 Sep­tem­ber, hund­reds of exhi­bi­tors will once again be pre­sen­ting them­sel­ves to tra­de visi­tors at Inno­Trans, the lea­ding tra­de fair for trans­port tech­no­lo­gy, in all 41 halls and on the ent­i­re open-air exhi­bi­ti­on grounds of the Mes­se Ber­lin. On the fol­lo­wing two days it will open up to a lar­ger audi­ence.

Con­ti­nue rea­ding

Bild Forum Deutscher Mittelstand 2018

12.09.18 — 13.09.18 Forum Deutscher Mittelstand


Under the patro­na­ge of Klaus Helm­rich, mem­ber of the Mana­ging Board of Sie­mens AG, the IPM con­fe­rence brings toge­ther deci­si­on-makers from the upper manage­ment of SMEs. The pro­gram inclu­des lec­tures, key­notes, mas­ter clas­ses and work­shops. A dis­count for par­ti­ci­pa­ti­on is given in the arti­cle.

Con­ti­nue rea­ding



The complete production line for 3D metal printing in one machine.

From sum­mer 2018, XERION is proud to announ­ce the ful­ly func­tio­nal and inte­gra­ted 3D prin­ting solu­ti­on for metals — The Fusi­onFac­to­ry.

The Fusi­onFac­to­ry not only offers a cost-effec­tive alter­na­ti­ve to the pro­duc­tion of com­plex metal parts, but also extends the pos­si­bi­li­ties of desk­top 3D prin­ters bey­ond pure pro­to­ty­ping through spe­ci­al­ly manu­fac­tu­red metal fila­ments and spe­ci­al­ly tailo­red debin­ding and sin­te­ring pro­ces­ses.


Date:           Fri­day, 7th of Sep­tem­ber, 2018

Time:          14:00 – 17:00 Uhr

Salz­ufer 15/16,
10587 Ber­lin (Cam­pus Char­lot­ten­burg)
Tel: +49 (0)30 – 200 970 20


FUSIONFACTORY com­bi­nes the 3 tech­no­lo­gi­cal steps of PRINTING/DEBINDING/SINTERING in one machi­ne with a cen­tral con­trol unit (see pho­to).

The com­pre­hen­si­ve func­tion of recei­ving and reporting allows high effi­ci­ent pro­duc­tion of metal­lic and cera­mic parts under indus­tri­al con­di­ti­ons. FUSIONFACTORY will be intro­du­ced for the first time to the public on the Open Day of XERION BERLIN LABORATORIES.

A pre­sen­ta­ti­on with fur­t­her details will be fol­lo­wed in the tra­de fair of Form­Next in Novem­ber in Frank­furt.

FUSIONFACTORY is deve­lo­ped and manu­fac­tu­red in Ber­lin.

We look for­ward to your visit!
The XERION – Team


Strong cooperation: PROTIQ and Conrad Electronic

Visi­tors to the Con­rad Elec­tro­nic web­site will now also recei­ve PROTIQ’s world-class 3D prin­ting ser­vice – and can con­fi­gu­re and order it on a dedi­ca­ted coope­ra­ti­on plat­form. 

750,000 items for pri­va­te custo­mers and over 1.4 mil­li­on items for busi­ness custo­mers – Con­rad Electronic’s port­fo­lio makes clear that the­re is a sizab­le elec­tro­nics com­pa­ny behind the popu­lar online por­tal. PROTIQ is now working with Europe’s lea­ding omnich­an­nel elec­tro­nics and tech­no­lo­gy pro­vi­der to tap into new oppor­tu­nities: “Thanks to the new ser­vice offe­ring, busi­ness cos­tu­mers of Con­rad can now also purcha­se custom-made 3D prin­ting pro­ducts as quick­ly as is pos­si­ble,” exp­lains Dr. Ralf Gärt­ner, Mana­ging Direc­tor of PROTIQ. “We have joint­ly set up a new online plat­form for the coope­ra­ti­ve pro­ject. From the ser­vice area, inte­rested par­ties are gui­ded direct­ly to our ser­vices.” Custo­mers can use the 3D con­fi­gu­ra­tors of the PROTIQ Mar­ket­place as well as the broad ran­ge of pro­ces­ses and mate­ri­als to select their desi­red 3D pro­ducts in the blink of an eye and, of cour­se, also order them strai­ght away. Sin­ce they can place the order via their exis­ting Con­rad user account, they need not even regis­ter with PROTIQ. Like the exis­ting PROTIQ Mar­ket­place, the joint plat­form impres­ses with its intui­ti­ve and user-fri­end­ly inter­face and modern lay­out.

The PROTIQ GmbH is con­ti­nuous­ly expan­ding its own port­fo­lio and activi­ties on the Mar­ket­place. The new con­nec­tion to the elec­tro­nics indus­try opens the door to tar­get groups who have no pri­or expe­ri­ence with 3D prin­ted pro­ducts. “In addi­ti­on to esta­blished scopes of app­li­ca­ti­ons like pro­to­ty­ping and the pro­duc­tion of small series, PROTIQ´s 3D ser­vice also addres­ses com­pa­nies from the main­ten­an­ce. Addi­ti­ve manu­fac­tu­ring is ide­al for the pro­duc­tion of spa­re parts or the indi­vi­du­al modi­fi­ca­ti­on of tools”, exp­lains Mar­kus Ober­mei­er, area mana­ger of Con­rad Elec­tro­nic. Edu­ca­tio­nal insti­tu­ti­ons such as schools, col­le­ges and trai­ning com­pa­nies are also among our custo­mers. Here 3D print models are often used for tea­ching pur­po­ses.”

Ralf Gärt­ner and Mar­kus Ober­mei­er are con­vin­ced of the new coope­ra­ti­on: “Toge­ther we are buil­ding a strong and for­ward-loo­king pro­duct divi­si­on. As a com­pa­ny with almost 100 years of know-how, Con­rad is always in search of new impul­ses. And in terms of inno­va­ti­on and first-class qua­li­ty, PROTIQ is exact­ly the right busi­ness part­ner. ”

The first-class 3D prin­ting ser­vice by PROTIQ is now also avail­ab­le at Con­rad Elec­tro­nic.

Try now


Network News 07/2018: Annual Meeting 2018 — book a place now!

Dear Mem­bers, Dear Com­mu­ni­ty

like the cur­rent sum­mer, the pre­pa­ra­ti­ons for our Annu­al Mee­ting 2018 are now ent­e­ring the hot pha­se. The­re­fo­re, we use this news­let­ter to pro­vi­de you with the rele­vant infor­ma­ti­on on sche­du­le, boo­king and hotels in good time.
In addi­ti­on, the­re is infor­ma­ti­on on the new­ly laun­ched Mate­ri­als working group and news from the association’s office.

Cur­rent over­view of mem­bers: www.mobilitygoesadditive.com/en/members/. A click on the logos leads you direct­ly to the respec­tive com­pa­ny home­pages.


09.00 — 10.30
Gene­ral Mee­ting

11.00 — Open End
Annu­al Mee­ting 2018

Im Mari­en­park, Ber­li


General Meeting

At the gene­ral mee­ting the­re is a cur­rent report of our board, the office and the cash audi­tor. Toge­ther we dis­cuss the sta­te of work and the future ori­en­ta­ti­on of our net­work. This also inclu­des the re-elec­tion of the Exe­cu­ti­ve Board and the finan­ci­al report.

[Die­ser Abschnitt ist nur für ein­ge­logg­te Mit­glie­der sicht­bar / This sec­tion is only visi­ble for log­ged in mem­bers]

Annual Meeting 2018

For tho­se who stay — it’s worth it! Becau­se the­re is a lot offe­red!
The fol­lo­wing is an open and exci­ting pro­gram with many oppor­tu­nities to net­work and get to know our new mem­bers.

We track all atten­de­es about the net­work topics and suc­ces­ses. The working group lea­ders pre­sent their results and are open for dis­cus­sion.

What’s the news? That”s what repor­ted by our speakers from various indus­tries:

  • Chris­toph Han­sen, Sau­ber Engi­nee­ring / For­mu­la 1 racing team
  • Prof. Dr. Sabi­na Jeschke, Chief Tech­no­lo­gy and Digi­tiza­ti­on Offi­cer DB AG
  • Sta­te Secreta­ry Rickerts, Sena­te Ber­lin, with his visi­on of a 3D prin­ting capi­tal

And you will be the­re when Mobi­li­ty goes Addi­ti­ve opens the new pre­mi­ses of its office in the Ber­lin 3D Prin­ting Hub!

Atten­ti­on — for the Annu­al Mee­ting: First come, first ser­ve!
Secu­re your place ear­ly via the boo­king page.

event page
An over­view of the event with cur­rent agen­da, the offers men­tio­ned below as well as impres­si­ons of our last events.

boo­king page
For quick deci­si­on-makers, go direct­ly to the boo­king page.

Arri­val by train
As in pre­vious years, Deut­sche Bahn is once again offe­ring an event ticket. If you are inte­rested in an easy and envi­ron­ment­al­ly fri­end­ly jour­ney by train, you will find infor­ma­ti­on and a link to the fixed pri­ce boo­king on the event page.

In Sep­tem­ber it’s fair time in Ber­lin.
We have thus agreed a con­tin­gent with two well-loca­ted hotels. The rooms in the Grimm’s Hotel am Pots­da­mer Platz and in the Stei­gen­ber­ger Hotel am Kanz­ler­amt (Ber­lin main sta­ti­on) are reser­ved until mid-August and can be boo­ked at a fixed pri­ce using the call form on the event page.


EU Par­lia­ment wants to face legal chal­len­ges of 3D prin­ting with new legis­la­ti­on

The Euro­pean Par­lia­ment has recent­ly adop­ted a deci­si­on on 3D prin­ting and the chal­len­ges it poses to intel­lec­tu­al pro­per­ty and civil lia­bi­li­ty and published a report on this (2017/2007(INI)).
More about this from our advi­so­ry coun­cellor Dr. Andre­as Leu­pold LL.M under the fol­lo­wing link.

Our Legal Frame­works working group will also be dealing with this topic on 20.09.2018. If you are inte­rested in working with us, plea­se con­tact us!


On July 9, 2018, the kick-off mee­ting of our new Mate­ri­als working group took place above the roofs of the city at Berlin’s main sta­ti­on. We would like to thank ever­yo­ne who made this start a suc­cess. Deri­ved from the par­ti­ci­pants’ are­as of inte­rest, the event initi­al­ly iden­ti­fied six focus groups with the fol­lo­wing working tit­les:

  • High Per­for­mance Poly­mers
  • Elas­to­mer Priniting
  • metal deve­lop­ment
  • Spe­ci­fi­ca­ti­on, Qua­li­fi­ca­ti­on, Gui­de­li­nes
  • Mar­ket Needs
  • Tes­ting Method Stan­dards

The­re will be a sta­tus report at the Annu­al Mee­ting 2018.

Lead: Dr. Tina Schling­mann, Deut­sche Bahn AG

fur­t­her working group dates

Edu­ca­ti­on 08.08.18 in Ber­lin
Lead: Olaf Stein­mei­er, Fraun­ho­fer IAPT

Appro­val 21.08.18 in Ber­lin
Lead: Maxi­mi­li­an Kun­kel, Sie­mens AG

Digi­ta­le Sup­ply Chain & IT mid-August, vote in pro­gress
Lead: Stef­fen Kuhn, EOS GmbH

Legal Frame­works 20.09.18 Con­fe­rence Call
Lead: Dr. Andre­as Leu­pold, Leu­pold Legal

Chan­ge Manage­ment in Sep­tem­ber
Lead: Oli­ver Cyna­mon, FIT AG

[Die­ser Abschnitt ist nur für ein­ge­logg­te Mit­glie­der sicht­bar / This sec­tion is only visi­ble for log­ged in mem­bers]

within the network

finan­ci­al audit

Our books were audi­ted in detail by the tax office in July for the first time and pas­sed in all respects the cri­ti­cal scru­ti­ny of the audi­tors.
Thanks to Frie­da Gripp, our finan­ci­al expert, for the gre­at work!

lawy­er for the net­work

We were also able to secu­re the legal sup­port of Mr. Ste­fan Nau from the Ber­lin law firm SEGELKEN & SUCHOPAR for the future.

further dates

insi­de the net­work


[Die­ser Abschnitt ist nur für ein­ge­logg­te Mit­glie­der sicht­bar / This sec­tion is only visi­ble for log­ged in mem­bers]



18 — 23.09.2018 — Bet­ween 18 and 21 Sep­tem­ber, hund­reds of exhi­bi­tors will once again be pre­sen­ting them­sel­ves to tra­de visi­tors at Inno­Trans, the lea­ding tra­de fair for trans­port tech­no­lo­gy, in all 41 halls and on the ent­i­re open-air exhi­bi­ti­on grounds of the Mes­se Ber­lin. On the fol­lo­wing two days it will open up to a lar­ger audi­ence.
[Die­ser Abschnitt ist nur für ein­ge­logg­te Mit­glie­der sicht­bar / This sec­tion is only visi­ble for log­ged in mem­bers]

16. — 18.10.2018 — IN(3D)USTRY  in Bar­ce­lo­na. Our net­work sup­ports the third edi­ti­on of the lar­gest tra­de fair for addi­ti­ve manu­fac­tu­ring in the Medi­ter­ra­ne­an regi­on as a part­ner. Our mem­bers recei­ve spe­cial con­di­ti­ons for this. If you are inte­rested, plea­se con­tact Ste­fa­nie Brick­we­de.

We would also be hap­py to draw atten­ti­on to your spe­cial events. Plea­se con­tact our Team for more infor­ma­ti­on. We are loo­king for­ward to see­ing you again soon, may­be at one of the events, and we will be broad­cas­ting until then.

Best regards, your
Mobi­li­ty goes Addi­ti­ve Orga-Team



Network News 06/2018: New business year, Annual Meeting 2018 — Tickets available

Our second busi­ness year ends and we can look back on a suc­cess­ful year thanks to our joint work. 75 com­pa­nies are cur­r­ent­ly working in our net­work on the esta­blish­ment and series pro­duc­tion readi­ness of addi­ti­ve manu­fac­tu­ring in indus­tri­al pro­duc­tion!
Five new mem­ber com­pa­nies will join this group at the begin­ning of the new busi­ness year:
Con­ti­nue rea­ding