16.10. — 18.10.2018 — IN(3D)USTRY  in Barcelona

Our net­work sup­ports the third edi­tion of the largest trade fair for addi­tive man­u­fac­tur­ing in the Mediter­ranean region as a part­ner. Our mem­bers receive spe­cial con­di­tions for this. If you are inter­est­ed, please con­tact Ste­fanie Brick­wede.

IN(3D)USTRY in Barcelona Explore the infinite possibilities of the Additive & Advanced Manufacturing

Robot­ics, moulds and dies, plas­tics and new mate­ri­als will be on dis­play togeth­er with 3D print­ing at the third IN(3D)USTRY fair, titled From Needs to Solu­tions. The pur­pose of the event is to pro­mote the use of this tech­nol­o­gy through­out the indus­try and, for this rea­son, this year’s event incor­po­rates new sec­tors as poten­tial future users of addi­tive man­u­fac­tur­ing. Orga­nized by Fira de Barcelona, IN(3D)USTRY will be held from 16 to 18 Octo­ber in Hall 8 at the Mon­tjuïc venue. The third IN(3D)USTRY fair, titled From Needs to Solu­tions, extends its influ­ence over the indus­tri­al ecosys­tem by increas­ing the num­ber of sec­tors attend­ing. In this regard, the event will fea­ture five the­mat­ic areas (advanced man­u­fac­tur­ing, moulds and dies, new mate­ri­als, plas­tics and 3D print­ing), based upon which the con­tent of the event will be devel­oped. Thus, with­in a sin­gle space, the event will include sev­er­al pre­vi­ous­ly absent indus­tries which could poten­tial­ly employ 3D print­ing. The advanced man­u­fac­tur­ing area will incor­po­rate the field of robot­ics applied to the indus­tri­al sec­tor. The moulds and dies area will explore how 3D print­ing can con­tribute to reduc­ing costs in this sub-sec­tor. And the new mate­ri­als area will address the huge pos­si­bil­i­ties open­ing up with the use of inno­v­a­tive plas­tic and metal­lic com­po­nents. The event will be struc­tured around the IN(3D)USTRY Are­na, a large area for inno­va­tion con­tain­ing a stage where sev­er­al rep­re­sen­ta­tives of com­pa­nies which are already apply­ing 3D print­ing to their pro­duc­tion process­es will explain their expe­ri­ences to the vis­i­tors. These will be com­pa­nies in sec­tors such as aero­nau­tics, health, indus­try, cars and retail. There will also be an exhi­bi­tion area dis­play­ing numer­ous exam­ples of parts man­u­fac­tured by means of this inno­v­a­tive tech­nol­o­gy, as well as the pres­ence of man­u­fac­tur­ers show­cas­ing their lat­est inno­va­tions in the field of cut­ting-edge print­ers. Miquel Ser­ra­no, the event’s direc­tor, declares that “the incor­po­ra­tion of new sec­tors into this year’s fair will enable us to expand the spec­trum of addi­tive man­u­fac­tur­ing and view the enor­mous pos­si­bil­i­ties offered by this tech­nol­o­gy in many indus­tri­al sec­tors. By group­ing togeth­er all the pro­duc­tion tech­niques which com­ple­ment addi­tive man­u­fac­tur­ing we will dis­play the entire pro­duc­tion and val­ue chain.” Accord­ing to Ser­ra­no, “three years after its launch, IN(3D)USTRY is now the lead­ing fair in Spain and this year, its third, it will also enable us to estab­lish our­selves as the pri­ma­ry bench­mark in South­ern Europe.” Barcelona Indus­try Week IN(3D)USTRY, From Needs to Solu­tions, forms part of Barcelona Indus­try Week, which also encom­pass­es the IoT Solu­tions World Con­gress, the world’s lead­ing event in the Inter­net of Things indus­try, and Healthio, spe­cial­iz­ing in health and san­i­tary care tech­nolo­gies. The three events, which share syn­er­gies and pro­vide a plat­form for trade and knowl­edge in sev­er­al indus­tri­al sec­tors, will be held from 16 to 18 Octo­ber at Fira de Barcelona. More: http://www.in3dustry.com/en/2018-edition

Posted in Event.