The AM Medical Days are the place to be when it comes to Additive Manufacturing in a medical context – from Implants and Bioprinting to Orthotics & Prosthetics and Hospital Care, the conference brings the entire value-added system related to 3D printed medical solutions together.

On December 11 & 12, doctors, manufacturers of medical technology and medical products, printing providers, suppliers, and representatives of research facilities and health insurances all came to Berlin. Together we listened to fascinating key notes about latest trends and achievements and actively participated in inspiring workshops.

What were the main topics on and off stage?

Did you know that in oral and maxillofacial surgery, printing on-site means speeding up the treatment process by up to nine days! That means not only less days in the hospital for the patient, but also equals major savings for the hospitals due to a shorter occupancy of beds.

The past two years have already shown improvements, but there is still a lot to be done. We are already looking forward to learning more at the next AM Medical Days!

As the year is coming to an end, we are delighted to already have a highlight to announce for the next year. This way we all have something to look forward to. On April 16, 2024, the Working Group Use Cases will establish a new Focus Group: namely Dental!
The future project work will essentially focus on topics related to materials and development in the dental industry. Questions that members of the group may be dealing with include

• What applications are there and what tests need to be carried out for proper use?
• Which tests are widely used or mandatory by standard?
• Which materials are best suited for which applications?

The focus group will tackle these and other questions as part of the interactive joint work. But as always, the specific content will be further defined together at the kick-off.

We will be opening the doors of Mobility goes Additive e.V. on April 16, 2024 from 2 pm to 5 pm and kindly invite all interested parties to our office – whether users from industry, representatives from research and development or material manufacturers, everybody is welcome.
Have we caught your interest?

Please enable JavaScript in your browser to complete this form.

Name *

First

Last

Layout

Position

Company

Email *

GDPR Agreement *

• I consent to having this website store my submitted information so they can respond to my inquiry.

Register

We are happy to announce our upcoming MGA Practical Guidance Seminar on EN ISO 10993. Which tests are relevant in the context of EN ISO 10993? Which are considered useful? How are they performed optimally? All of these such as further questions will be answered in our workshop taking place during the AM Medical Days 2023.

We offer a seminar for material and machine manufacturers as well as for all interested parties in the AM scene on the optimal use of EN ISO 10993 for AM-relevant materials. The focus will be set on materials of the manufacturing of medical devices.
The seminar will be held together with Expertants GmbH and HygCen Germany GmbH.

When?
December 12, 2023
14:45 to 15:45

Where?
The Workshop will take part during the AM Medical Days 2023 at Holiday Inn: Berlin Airport – Conference Centre

For further information please feel free to contact Cora Lüders-Theuerkauf.

Please enable JavaScript in your browser to complete this form.

Name *

First

Last

Layout

Position

Company

Email *

Ticket *

• Ja, ich habe ein Ticket für die AM Medical Days
• Nein, ich habe kein Ticket für die AM Medical Days

Für den Besuch des Workshops ist die Teilnahme an den AM Medical Days notwendig

GDPR Agreement *

• I consent to having this website store my submitted information so they can respond to my inquiry.

Zum Seminar anmelden

In today’s fast-paced world marked by technological leaps and a heightened awareness of environmental concerns, the manufacturing industry stands at a crossroads. Additive Manufacturing has emerged as a game-changer, unlocking unparalleled possibilities for innovation and production efficiency. In this environment, the need to integrate ecological sustainability into AM processes has become apparent.
At first glance, AM is often hailed as a “green” technology, but closer inspections show a need for distinctions: Even given that when the advantages of AM, such as design freedom and material efficiency, are fully leveraged, it can indeed be far more sustainable than traditional manufacturing methods, the ecological challenges remain.
To tackle these distinctions, the Ecological Sustainability Working Group of the MGA network has written a Management Summary to provide a short but comprehensive overview of the critical dimensions of environmental sustainability in AM. They seek to foster a more informed discussion on this crucial topic by aligning it with the phases of the Circular Economy.
While there’s room for improvement in the AM industry on these fronts, it’s vital to acknowledge that AM, like any other manufacturing process, has its strengths and weaknesses. It’s not a one-size-fits-all solution to sustainability challenges. Nevertheless, when fully harnessed, AM holds the potential to make a significant positive impact on sustainability.
As members of MGA’s Ecological Sustainability Working Group, we invite you to engage in lively debates on this subject. By acknowledging the challenges and seizing the opportunities within Additive Manufacturing, we can collectively work towards a more sustainable future.
We would like to invite you to discuss this and other topics that concern you personally or your company on the topic of sustainability with our Working Group Ecological Sustainability at our booth D31 in hall 11.1 at this year’s formnext from November 7 – 10 in Frankfurt.

Click here to download Management Summary: Sustainable AM Chances – and challenges for a green future

On September 28 we held a workshop with Andrew Littlefield from the US Army and our members to discuss the potential of AM in the defence sector. Following this, we are excited to announce the launch of the Working Group DEFENSE on November 9, 2024 at the Formnext in Frankfurt.
Join us as we explore the convergence of AM, future product development, and obsolescence management in defence technologies. We aim to foster collaboration and knowledge sharing between the different stakeholders, state actors, OEMs and the AM industry.
Our working group will delve into the latest developments in AM and its integration into future defence products. In today’s fast-paced technological world, obsolescence management is critical. We will explore strategies and best practices for managing obsolescence and ensuring the longevity of defence systems.

When and where?

November 9, 2023
1.30 – 5 pm
Formnext Frankfurt

Want to join us?
Please send an email to Sven Fritzsche.

For questions or specific needs, feel free to contact us. We want to make this Working Group as beneficial as possible for you. If you are from a non-NATO or a non-EU country, please inform us.

We look forward to welcoming you in Frankfurt and creating a future of collaborative achievements that embrace innovation and tackle obsolescence challenges.

Spending two days surrounded by the combined knowledge AM experts, pioneers, and innovators – this is a dream come true for us at MGA. And it’s exactly what we had the privilege of doing during the past two days at the MGA Annual Meeting and Women in AM Summit 2023!

We have had the privilege of exploring a wide spectrum of diverse AM applications and captivating AM journeys. The possibilities within this field are limitless, and we’re excited to witness the incredible innovations that will shape the future. We are looking back at networking opportunities, workshops, panel discussions, insightful talks, and, of course, the 3D evening event with 3D printed food. Trying to pick the highlights from this experience is nearly impossible, but we’ll do our best to capture some of the magic for you.

The Women in AM Summit

We started our 4-events-in-two-days marathon with our women-only “Women in AM Summit”. The aim of this event is to bring together female role models and AM experts on stage and an all-female audience to inspire the open exchange in a relaxed setting – something that is nearly impossible when being part of a larger event in an industry of only 15% female quota. Our participants are invited to learn from each other – pioneers mentoring newcomers – while at the same time connecting the female representatives of our industry as well as hearing updates from that industry on for example AM in construction, AM ceramics, dental AM and much more.

A special thank you to our speakers and especially Małgorzata Kielak, the founder of Find Your Wine Match, who hosted a wonderful ice-breaker event in the afternoon and our external source of inspiration, Sven Krause, who coached our guests on the relevance of Feelgood Management in retaining employees.

The Yearly Gathering of the Working Group Materials

The face-to-face meeting of our Working Group Materials – MGA’s largest Working Group – included pitches from the Focus Groups WAAM and Technical Data Sheets as well as the Medical Focus Group Analysis and Processing. The members of the group came together not only to hear about current projects, but also to define the next steps.

One thing that we would like to highlight at this point: our Materials Working Group led at that point by Dr.-Ing. Tina Schlingmann received the prize for the best paper for their article on the results of their Round Robin test. The award was well-deserved, showcasing the outstanding research and contributions from the MGA members.

The General Assembly

As an association, we are happy to host all our 142 members for the General Assembly, where our Executive Board, Nicole Friedrich, Johannes Emmelheinz, Prof Dr-Ing Claus Emmelmann and Prof Dr Florian Thieringer, recaps the past fiscal year and our treasurer Carmen Schmieder presents the annual fiscal report – Carmen was also re-elected as treasurer by the General Assembly.

This year, our Executive Board honoured our former members of the advisory board, Klaus Roeser and Steffen Kuhn, for their exceptional dedication and service with an honorary membership.

The Executive Board also honoured the support from and expertise of our advisory board (Oliver Cynamon, Sonja Rasch, Andreas Leupold, Bernhard Winkler) and the extended board (Torsten Wehrkamp, Olaf Steinmeier) and we would like to take this opportunity to also thank them for their continuous work.

We also welcomed two new members to our Advisory Board: Dominic Duda (Takeda) and Marc Fette (CTC – An Airbus company), we look forward to working with you.

The 3D Evening Event

Where can you try 3D printed Pasta, Steak and Salmon?! Exactly, at our 3D evening event that we hosted outdoors in the Marienpark in Berlin (thanks to Investa for giving us the space to host our members and friends).

The weather was more than perfect and most of our guests spend the evening enjoying the last warm summer night outside, networking and enjoying the food from our BBQ station and Pasta cook.

The MGA Annual Meeting

September 27 was dedicated to our MGA Annual Meeting where we not only presented the current status of our MGA Mobility and Medical Working Groups but also heard from a diverse selection of panellists and keynote speakers about printing bones, the global AM developments and the latest trends of the AM industry. In our small exhibition our guests were able to have a look at the winning applications of this year’s 3D Pioneers Challenge – thank you for letting us show these great applications for AM. We also hosted our first Workshops during an Annual Meeting: thank you to trinckle 3D for hosting a session on AM software and to Berhard Winkler for moderating the MGA Workshop. At the end of the day, the event was a celebration of innovation, collaboration, and the boundless possibilities of AM.

Thanks to Andrew Littlefield, we learned that every year the US Army allocates $1 billion just for AM topics. We of course had to follow up on that with a specific workshop the following day highlighting what companies must do to benefit from the funds. This workshop laid the groundwork for the Kick-Off of the new Working Group Defence happening on November 9 at the Formnext in Frankfurt (want to join? Contact Sven Fritzsche).

Thank you and see you next year

Thank you to all our speakers and of course our Working Group Leaders for their contributions to the event and our network!

We extend our heartfelt gratitude to our 142 members for being an integral part of our community. Your presence and active participation have enriched this event, contributing to the vibrant atmosphere, and making it a grand success.

The two-day marathon would not have been possible without the great support from our partners (Berlin Partner für Wirtschaft und Technologie GmbH, Siemens Mobility, Protiq Marketplace, Trinckle 3D, SLM, Women in 3D Printing), our amazing technical provider (AV Union Eventtechnik), our great photographer (Philipp von Recklinghausen).

As we continue this journey, let’s maintain the momentum and look forward to more enlightening discussions, networking opportunities, and groundbreaking research in the future. Your contributions make all the difference, and together we shape the future of AM.

Please save the date for next year in your calendars:
October 8 – 9, 2024

Segmentation is an important step of the medical 3D printing process. In this process, virtual 3D models of the target structures are created from slice image data sets using suitable image data processing programs. The segmentation results still heavily depend on the examiner, while both approved paid medical products and open-source solutions can be used for this purpose. There are several reasons why it is important to evaluate open-source segmentation programs regarding correctness and precision, e.g. to lower the barriers for medical 3D printing in general and to enable access to the technology in less developed regions, as well as for the influence of the examiner on the segmentation result. Furthermore, the person segmenting the data has a significant impact on the segmentation result, depending on the experience.
The aim of the study is to examine the non-inferiority of the open-source software “3D Slicer” regarding correctness, precision, and inter-examiner reproducibility of the segmentation results compared to approved medical devices. The tests will be incorporated in an international multicenter study design. Abdominal CT scans, for which a positive ethical vote has already been obtained, will be used as data basis.

Have we sparked your interest, or do you have further questions?
Then we would be happy to welcome you to our virtual kick-off on 04 October 2023 from 4:00 pm to 5:30 pm!
Feel free to contact Cora for participation and further information about the project.

Additive Manufacturing is a game-changer in various industries, and the defense sector is no exception. It presents a myriad of opportunities to transform the way we design, produce, and maintain critical components. By harnessing the power of Additive Manufacturing, we can enhance defense readiness, reduce costs, improve supply chain resilience, and enable rapid prototyping and production of crucial defense systems.

But how can we best use AM in this highly demanding sector? This questions needs to be answered, which is why we are thrilled to announce the official launch of the next MGA Working Group: Defense!
On September 28, one day after our MGA Annual Meeting, we invite you to be part of this endeavour to explore the possibilities of Additive Manufacturing technologies for the defense sector.

Our Working Group brings together a diverse range of experts and professionals from the defense industry, academia, and government agencies.

Through regular meetings, workshops, and collaborative projects, we aim to foster a vibrant ecosystem that encourages the exchange of ideas, best practices, and cutting-edge research. Together, we will explore the latest advancements, challenges, and opportunities in additive manufacturing, with a specific focus on defense applications.

Join us at our Kick-Off in Berlin – whether you are a researcher, engineer, defense professional, or working for an interested NATO government agency, your participation and expertise will be invaluable in driving our collective mission forward.

To get involved, please contact Sven Fritzsche for more information.

Join the kick-off and shape the future of defense manufacturing.

The first buildings of humankind were erected about 11,000 years ago – but since those rudimentary temple structures in Turkey, we imagine that one or two things have changed in the construction industry – an industry that is like so many others dependent on environmental factors and of course must keep up with current technology developments.

One technology that might be of use to the industry is our Additive Manufacturing: it is already in use and showing potential in minimizing the use of materials and maximizing the freedom of design while at the same time lowering the emissions of CO². Use Cases also include the printing of customised formwork at the actual construction site – saving both time and money.

But we still have questions:

• How can Additive Manufacturing improve this industry?
• How is 3D Printing already used in Construction?
• What are the advantages and disadvantages of AM in Construction?
• What needs to be done to establish AM in Construction?

Together with architects, engineering firms, builders, material suppliers and a multitude of other trades, the construction industry is structured differently and more complex than large parts of the rest of the additive industry – which is why we are bringing together the various players to shed light on the advantages and opportunities of the cooperation of AM and construction.

We are hosting the first ever MGA “Construction” Workshop on June 28, 2023 at 11am in Berlin.

Hosted by Stefanie Brickwede, MGA & Deutsche Bahn, and opened by Dr Karsten Heuser, Siemens, we will hear keynotes from Dr. Fabian Meyer-Brötz, PERI 3D, Prof. Dr. Inka Mai, TU Berlin, Dr. Ksenija Vasilić, DBV, and François Perrot, 14Trees.

If you would like to join our Workshop, please contact Sven Fritzsche to learn more.

Overview:

When: June 28, 11am – 4pm
Where: MGA Office, Berlin
What: Discussions, Keynotes, Lunch & Networking

The formnext homepage clearly states: “Within the framework of Formnext, more than 800 exhibitors and more than 30,000 visitors will meet from November 7 – 10 2023 and transform Frankfurt am Main into the capital of Additive Manufacturing. This community, the fAMily, is dedicated to the ever-growing use of AM in an industrial context.”

These figures make formnext Germany’s largest AM event and therefore predestined for a competition like the Start-up Challenge. Here, young, creative companies are offered the platform to assert and present themselves in the AM industry. Participation not only provides the opportunity for inspiring exchange with experts, potential customers, and investors, but also the chance to secure an attractive and comprehensive price.

The Challenge also offers participants valuable feedback from industry-leading experts: it is with great pleasure that our Managing Director Stefanie Brickwede takes her place on the jury alongside luminaries such as Arno Held, Managing Partner at AM Ventures, Alexander Oster, Director Additive Manufacturing at Autodesk and Michael Petch, Editor in Chief at 3D Printing Industry.

Nevertheless, even non-participants should not miss the opportunity to follow the Start-Up Challenge. The ideas presented show ingenuity and stimulate a meaningful and innovative exchange about the future of the AM industry. It is only by encouraging innovation like this that the AM industry can grow sustainably.

We look forward to meeting you as a contributor or as a spectator (at the Challenge or at the formnext trade fair, we are in Hall 11.1) and being inspired by new and witty pitches!

More information and the opportunity to participate can be found here: https://formnext.mesago.com/frankfurt/en/themes-events/program/startup_challenge.html